Product Description
Details
Retain control! - The new PO1200 is the only unit in the O&P field which is able to operate the heating process by the material temperature
The PO1200 convection oven has been developed for the special needs of Pre-Preg processing in the O&P field. The large housing with double doors allows to place multiple hanging moulds inside the oven. A standard 4x vacuum connector is mounted inside the oven. An external water separator is placed at the right side of the housing.
Due to the three zone segmentation the user can adjust the inside dimension of the heating cabinet. Thus the energy consumption is reduced to a minimum when processing smaller moulds. The specific zones are automatically activated by placing the intermediate shelf. If required, the PO1200 Pre-Preg oven can also be used for processing normal Themoplastics like PE or PP. Dedicated accessories like Blister-forming frames, cradles or teflon coated shelfs are available as options.
Feature overview
- Microprocessor based control with PID feature, optimized for Pre-Preg processing
- User friendly control interface with touch-panel
- Timer- and Ramp-feature for programming individual heating graphs
- Mould/Material-sensor to control the unit by material temperature
- Energie-saving 3-zone segmentation to reduce inside dimensions of the heating cabinet for small moulds
- Standard 4x vacuum-connector with external water-separator
- On 4 casters with stop, double doors with double-pane viewing
window - Three zone heating cabinet segmentation by intermediate shelf
Specifications
- Dimensions: Outisde: W 1230mm x D 920mm x H 1570mm (48'' x 36'' x 62'')
- Inside: W 1000mm x D 620mm x H 1200mm (39'' x 24'' x 47'')
- 240V / 60Hz / 1 or 3 Phase / (16 Amp. CEE) / total capacity 10,2 kW
- Heating: 3x 3300W, 3x fan motor with reversing rotation diretion
- Temperature infinitely adjustable 30°C to 250°C,
- Temperature unit adjustable °C/°F ,
- Illumination: 2 x 25 watts
- Colour: Inside stainless steel, outside structural effect paint RAL 9005 black, other RAL colours available on request (surcharge)
- Weight net: 283 lbs (129 kg)
- Crated Weight: 418 lbs (190 kg)
Options
- Accessories for processing of Blister forming frames
